Direct naar de inhoud
⚡ Kritieke cyberalerts voor jouw sector & systemen — direct in je inbox. Aanmelden →
cybernieuws.nl Cybersecurity en informatiebeveiling nieuws alerts live · 11 min 122 bronnen 2 kritiek 28 vandaag
CVE's Videos Dagbriefing

← Terug naar CVE-database

CVE-2026-80931

HIGH · 7.8 CVSS Gepubliceerd:

Beschrijving NL

In the Linux kernel, the following vulnerability has been resolved:

w1: ds28e17: reject an oversize length on an I2C block read

w1_f19_i2c_master_transfer() is the master_xfer for the DS28E17 1-Wire
to I2C bridge. On an I2C_M_RECV_LEN read, it takes the length from the
device. The downstream slave puts a length byte in buf[0]. The driver
then reads that many bytes into buf[1] with w1_f19_i2c_read(). buf[0] is controlled by the device and can be 0 to 255. w1_f19_i2c_read() only rejects a zero count. The caller buffer is
I2C_SMBUS_BLOCK_MAX + 2, so 34 bytes. A length above 32 makes the read
run past it, up to about 222 bytes out of bounds. The SMBus core does check buf[0] against I2C_SMBUS_BLOCK_MAX. That
check runs after master_xfer returns. By then the write is already
done. i2c-algo-bit rejects an oversize length before it copies, and
returns -EPROTO. Reject a length above I2C_SMBUS_BLOCK_MAX at both RECV_LEN sites, the
same way i2c-algo-bit does.

Origineel (Engels) tonen

In the Linux kernel, the following vulnerability has been resolved:

w1: ds28e17: reject an oversize length on an I2C block read

w1_f19_i2c_master_transfer() is the master_xfer for the DS28E17 1-Wire
to I2C bridge. On an I2C_M_RECV_LEN read, it takes the length from the
device. The downstream slave puts a length byte in buf[0]. The driver
then reads that many bytes into buf[1] with w1_f19_i2c_read().

buf[0] is controlled by the device and can be 0 to 255.
w1_f19_i2c_read() only rejects a zero count. The caller buffer is
I2C_SMBUS_BLOCK_MAX + 2, so 34 bytes. A length above 32 makes the read
run past it, up to about 222 bytes out of bounds.

The SMBus core does check buf[0] against I2C_SMBUS_BLOCK_MAX. That
check runs after master_xfer returns. By then the write is already
done. i2c-algo-bit rejects an oversize length before it copies, and
returns -EPROTO.

Reject a length above I2C_SMBUS_BLOCK_MAX at both RECV_LEN sites, the
same way i2c-algo-bit does.

References